How To Insert Houses In Bottles

I classified my artwork into five steps.

1. PLANING: In this step you have to select an item plan, which you are going to construct inside the bottle (for example: Taj Mahal). Know you have to measure the area inside the bottle were you are going to Construct.

HOW TO MEASURE: Don’t worry I will explain. Take the bottle and place it on a white paper and draw the bottom size of the bottle by using pencil. The above picture gives you an idea.

Then measure the glass size (thickness) of the bottle and remove the measured Glass size from the drawn bottle bottom size. Know you got the actual size of the Bottle. Know according to the actual inner area of the bottle. Draw the article Plan (Taj mahal). Which you are going to construct. See the above picture for more details. Know you got the size of your article. Then draw each piece of your article according to its size.

2. SHAPEING: In this step your practice section is used .I mean u should have known how to shape wood pieces into required shapes using carpenter tools. Select a soft wood (for comfortable to shape). Then according to the size drawn. Shape your article with soft wood.

(NOTE: while shaping you have to be conscious that each shaped wood piece should be able to move through the mouth of the bottle.)

After shaping if you want to color your article paint with suitable colors and make them dry for one day.

3. INSERTING: This is the step were it really test your patience mean you have to be more consent rated on work. Know place each pieces of shaped wood into the bottle through the mouth using for chips.

While buildings inside you have to first complete the construction from bottom side and sides of the article, as a real building construction .I mean first pillars next walls after completing down go for the roof of the building.

4. STICKING: In this process you required gum (fevicol recommended) and stick (thin). Know take the gum with the wire and apply were you are going to place the pieces of your article inside the bottle. Know place the article pieces gently on the gum using forcipes, wait for 1 or 2 hours to make it dry, and go for another piece with the same process.

5. CLEANING: In this process you required a wire (hard) used to bend inside bottle to required angle. Which is used to clean the marks made while constructing inside the bottle. Take care while cleaning it may disturb whole article inside.

Finally you became the artist having Miniature Art in you.